LED display operation precautions
As China's LED display development industry continues to increase, in the streets of major cities, led large screen display has gradually increased, people's consumption level is also growing, LED lighting has gradually been applied to the daily life of the family, LED electronic display Not only has it improved the image of the city, LED also enriches people's cultural life.
The LED display is a flat panel display consisting of a small LED module panel for displaying various information such as text, images, video, and video signals.
In this respect, it can be reflected that the development speed of the LED industry is so fast. While we enjoy the economic benefits brought by the LED electronic screen, some merchants with LED electronic displays do not fully understand the operation and use precautions of the LED electronic screen. This leads to a shortened life of the LED electronic display.
1. Switch LED electronic display notes:
Switching sequence: When opening the screen: first turn on the screen, then turn on the screen. When the screen is closed: first turn off the screen, then turn off the screen. (The first time the computer is turned off, the screen will be highlighted, and the LED will burn out the lamp. The consequences are serious.)
The time between switching screens should be greater than 5 minutes. After the computer enters the engineering control software, it can be powered on. Avoid opening the screen in the full white screen state because the system has the largest inrush current. Avoid opening the screen in an uncontrolled state because the system has the largest inrush current.
The computer does not enter a program such as control software; the computer is not powered; the control part is not turned on. When the ambient temperature is too high or the heat dissipation conditions are not good, LED lighting should be careful not to open the screen for a long time.
When a part of the electronic display body appears to be very bright, it should be noted that the screen should be turned off in time, and it is not appropriate to open the screen for a long time in this state. Frequently, the power switch of the display screen trips. Check the screen or replace the power switch. Check the tightness of the hooks regularly. If there is looseness, pay attention to timely adjustment, re-reinforce or update the hanger. According to the environment of the large screen display screen and the control part, avoid insect bites and place anti-rat medicine if necessary.
2. Changes in control parts, changes in precautions
The power cord of the computer and control part is zero, and the fire cannot be reversed. It should be inserted in the original position strictly. If there are peripherals, after the connection is completed, the chassis should be tested for power.
When moving the computer and other control equipment, first check the connection line and the control board for looseness before power-on. The position and length of the communication line and flat connection line cannot be changed at will. If abnormalities such as short circuit, trip, burnt line, or smoke are found after moving, the power should not be tested repeatedly. The problem should be found in time.
3. Software operation precautions
Software backup: WIN2003, WINXP, application, software installation program, database, etc. It is recommended to use "one-click restore" software, easy to operate. Proficiency in installation methods, raw data recovery, backup. Master the setting of control parameters and the modification of basic data presets
Skilled in using programs, operations and editing. Regularly check to remove unrelated data from non-professionals and do not operate the software system.
---------------------------------------------------------------------------------
Recommended related products
KONWHAI -- Touch Screen kiosk, click to enter to understand
KONWHAI -- LCD advertising machine, click to enter to understand
KONWHAI -- Smart meeting whiteboard, click to enter to understand
Official website: www.kwhtouch.com
---------------------------------------------------------------------------------
The LED display is a flat panel display consisting of a small LED module panel for displaying various information such as text, images, video, and video signals.
In this respect, it can be reflected that the development speed of the LED industry is so fast. While we enjoy the economic benefits brought by the LED electronic screen, some merchants with LED electronic displays do not fully understand the operation and use precautions of the LED electronic screen. This leads to a shortened life of the LED electronic display.
1. Switch LED electronic display notes:
Switching sequence: When opening the screen: first turn on the screen, then turn on the screen. When the screen is closed: first turn off the screen, then turn off the screen. (The first time the computer is turned off, the screen will be highlighted, and the LED will burn out the lamp. The consequences are serious.)
The time between switching screens should be greater than 5 minutes. After the computer enters the engineering control software, it can be powered on. Avoid opening the screen in the full white screen state because the system has the largest inrush current. Avoid opening the screen in an uncontrolled state because the system has the largest inrush current.
The computer does not enter a program such as control software; the computer is not powered; the control part is not turned on. When the ambient temperature is too high or the heat dissipation conditions are not good, LED lighting should be careful not to open the screen for a long time.
When a part of the electronic display body appears to be very bright, it should be noted that the screen should be turned off in time, and it is not appropriate to open the screen for a long time in this state. Frequently, the power switch of the display screen trips. Check the screen or replace the power switch. Check the tightness of the hooks regularly. If there is looseness, pay attention to timely adjustment, re-reinforce or update the hanger. According to the environment of the large screen display screen and the control part, avoid insect bites and place anti-rat medicine if necessary.
2. Changes in control parts, changes in precautions
The power cord of the computer and control part is zero, and the fire cannot be reversed. It should be inserted in the original position strictly. If there are peripherals, after the connection is completed, the chassis should be tested for power.
When moving the computer and other control equipment, first check the connection line and the control board for looseness before power-on. The position and length of the communication line and flat connection line cannot be changed at will. If abnormalities such as short circuit, trip, burnt line, or smoke are found after moving, the power should not be tested repeatedly. The problem should be found in time.
3. Software operation precautions
Software backup: WIN2003, WINXP, application, software installation program, database, etc. It is recommended to use "one-click restore" software, easy to operate. Proficiency in installation methods, raw data recovery, backup. Master the setting of control parameters and the modification of basic data presets
Skilled in using programs, operations and editing. Regularly check to remove unrelated data from non-professionals and do not operate the software system.
---------------------------------------------------------------------------------
Recommended related products
KONWHAI -- Touch Screen kiosk, click to enter to understand
KONWHAI -- LCD advertising machine, click to enter to understand
KONWHAI -- Smart meeting whiteboard, click to enter to understand
Official website: www.kwhtouch.com
---------------------------------------------------------------------------------
Comments
Post a Comment